Clean Facilities. Confident Workplaces. 360°Serving Williamson & Travis Counties

Client Center

Resources

Apartment Unit Turns: What a Make-Ready Cleaning Should Include

Article5 min read

CleanPro 360 technician cleaning a kitchen during an apartment unit turn

A vacant apartment is not ready to show just because the resident's furniture is gone. Leasing teams in Austin, Pflugerville, and Cedar Park tell us the turn is where the make‑ready calendar either holds or slips. Paint, carpet, and repairs have their own vendors. The cleaning has to land in the gap so a prospect walks into a unit that looks cared for, not just empty.

This guide is for property managers and make‑ready supervisors. It covers what a commercial unit‑turn clean of a vacant apartment should include. We clean those units for communities, on the schedule your make‑ready process sets, after the resident has moved out.

Where the turn clean sits in make‑ready

Most communities run the same sequence, even if the names differ. The resident moves out, maintenance notes the repairs, painting happens if it is needed, and then the unit is cleaned before it is photographed or shown. Cleaning too early means paint dust and drywall fines land on a finished kitchen. Cleaning too late pushes the ready date. When we set up unit turn cleaning with a community, we ask how you want that handoff to work: who releases the unit, who meets us for access, and who walks it afterward.

A turn clean assumes the unit is empty of the former resident's belongings. We are not a hauling company, and we do not repaint, patch, or replace flooring. If a unit still has furniture, large debris, or an active repair, tell us before the visit so the clean can be timed around it.

What a make‑ready clean should include

The list below is the scope we build a turn around. Your community's agreement can add or leave off items, but these are the rooms prospects actually notice.

Kitchen

  • Inside and outside of the refrigerator, including shelves and the door gasket, once it is empty and defrosted.
  • Range, oven interior, and drip pans or the glass cooktop.
  • Microwave, inside and out.
  • Sink, faucet, and disposal splash area.
  • Countertops, backsplash, and cabinet fronts. Interior shelves if the community wants them wiped.
  • Floors, including the edges under where the refrigerator sits if it was pulled out for maintenance.

Bathrooms

  • Toilet, tub or shower, tile, and the corners where soap film collects.
  • Sink, faucet, mirror, and medicine cabinet exterior.
  • Towel bars, toilet paper holder, and the top of the tank, which hold dust in a closed‑up unit.
  • Floor, including behind the toilet.

Living areas, bedrooms, and closets

  • Dust window sills, baseboards, door tops, and closet shelves. Vacant units in this climate collect a surprising amount of fine dust, especially if a window was left cracked or a nearby building is under construction.
  • Wipe doors, light switches, outlet covers, and closet rods.
  • Clean interior glass and the tracks of sliding doors if they are part of your scope.
  • Vacuum hard floors and carpet, or schedule carpet cleaning as its own step, described below.
  • Remove cobwebs and check light fixtures for dust, without replacing bulbs or making repairs.

The details that fail an inspection

Make‑ready walks tend to catch the same misses: a dusty return‑air grille, a sticky cabinet pull, hair in a corner of the bathroom, and a patio or balcony that was never swept. We treat those as part of the clean, not as extras, unless your scope says otherwise. We do not handle lock changes, paint touch‑up, or filter replacement unless that work is specifically written into the agreement.

Carpet on a turn

Communities choose one of two options for each unit. A turn clean covers the unit as described above, with vacuuming. A turn clean plus carpet cleaning adds in‑unit carpet cleaning on the same visit for the rooms that have carpet. That second option is the one we recommend when a unit has visible traffic lanes, pet odor in the fiber, or a long tenancy. It is still a choice you make per unit. Carpet replacement, stain warranties, and pad repairs stay with your flooring vendor.

Our carpet work for turns uses the same low‑moisture encapsulation method we use in offices, so a unit is not left soaking while the next trade is trying to get in. How often a community adds carpet cleaning depends on the unit, the carpet's age, and what your inspection standard is.

Central Texas units have a few extra problems

A vacant unit here does not stay neutral while it waits.

  • Dust and caliche. New communities in Leander, Liberty Hill, Hutto, and the edges of Georgetown often sit next to active pads. Fine dust drifts into sliders and into the texture of a ceiling. A wipe that would be enough in a sealed high‑rise is not enough on the first floor facing a construction road.
  • Heat in a closed unit. In summer, an empty apartment with the thermostat set back can hold odors in carpet and in a refrigerator that was turned off. We would rather clean after the unit has been aired and the appliances are ready, not before.
  • Pollen. Cedar season, roughly mid‑December through February, and the spring pollen that follows it, coat window sills and balcony rails. It is worse west of I‑35, in Cedar Park, Leander, and Liberty Hill, but we see it in Austin and Round Rock entries too.
  • Rainy‑season entries. Ground‑floor patios and the threshold at the front door collect mud after a storm. If we clean before the rain and the door is used by maintenance afterward, the entry will need another pass. Tell us when the unit is actually finished.

How to hand a unit to the crew

  • The unit number, floor plan, and whether you want carpet cleaning included.
  • Access: a lockbox, a digital code, or a key signed out from the office. We do not keep keys beyond the visit unless the agreement says so.
  • What is still outstanding. If painters are in the unit the same morning, the clean will not hold.
  • Who walks it when we are done, and how you want punch items reported.

We work this way for communities in Austin, Round Rock, Georgetown, Cedar Park, Leander, Pflugerville, Hutto, Taylor, and Liberty Hill. The same team can also keep the clubhouse, fitness center, and other common areas on a recurring schedule, so the unit and the amenities are not two different standards.

If you want a turn scope written around your floor plans, request a free on‑site quote or call us at (512) 200‑7093. We will walk a vacant unit with you and match the clean to the way your make‑ready process already runs.

Frequently asked questions

What should a make-ready unit turn clean include?

A typical vacant-unit clean covers the kitchen and appliances, bathrooms, floors, baseboards, window sills, doors, switches, closets, and the small spots that fail an inspection, such as a dusty grille or an unswept balcony. Repairs, paint, and flooring replacement stay with the community’s other vendors.

Can carpet cleaning be included in a unit turn?

Yes. Each turn can be scheduled as a turn clean, or as a turn clean plus in-unit carpet cleaning, depending on the option you choose for that unit.

Who is unit turn cleaning for?

Property managers and make-ready teams at apartment communities. We clean the vacant unit after move-out so it can be shown. The work is scheduled around the community’s make-ready process.

Free on-site quote

READY FOR A CLEANER WORKPLACE?

Get a free, no-obligation on-site quote today.

CallGet a free quote